ADSL2+ Wireless 11n Router

 ADSL2+ 11n Router 

Features

  • ANSI T1.413 Issue 2, ITU-T G.992.1(G.dmt) and G.992.2 (G.lite) compliant for Annex A, B, ITU-T G.992.3, G.992.4 for ADSL2 and ITU-T G.992.5 for ADSL2+

  • Supports True MIMO wireless, Compatibility with IEEE 802.11g/b and 802.11n draft 2.0 (2.4GHz) standards

  • Superior wireless coverage, less dead spaces and higher throughput with MIMO technology

  • Supports data rates up to 300Mbps for wireless networks

  • Supports ADSL Downstream and upstream data rates up to 24Mbps and 2Mbps

  • Compliant with IEEE 802.3, 802.3u 10/100M Ethernet standards

  • Supports 64/128-bit WEP, WPA, WPA2 for wireless security

  • Configuration and management operated via WWW browser with password protected access

  • Supports DDNS, DMZ and Port-forwarding

  • WAN and LAN side connection statistics

  • DMZ and Virtual Server function provided operating modes include routing, bridge, static IP, PPPoE, PPPoA etc

  • Ethernet to ADSL-self-learning (up to 128 MAC) transparent bridging compliant with IEEE 802.1d

  • All Ethernet ports support Auto-Crossover (MDI/MDI-X) - No need for crossover cables

Specification :

Interface
  • 4 RJ-45 for Ethernet, 10/100M
  • 1 RJ-11 for ADSL line
  • 3 Antennas
  • 1 Power Jack

Standards
  • ITU-T G.992.1(G.lite), G.992.2(G.dmt), G.992.3, G.992.4, G.992.5
  • ANSI T1.413 issue 2
  • IEEE 802.3, 802.3u 10/100M Ethernet standard
  • IEEE 802.11b, 802.11g and 802.11n Wireless standard

ATM Features
  • WAN Mode Support : PPP Over ATM (RFC2364) and PPP Over Ethernet (RFC2516)
  • LAN Mode Support : Routed / Bridge Ethernet Over ATM (RFC-2684)
  • Classical Internet Protocol Over ATM (RFC-1577)
  • CBR / UBR / UBR with PCR Shaping / VBR-rt / VBR-nrt
  • Supports 8 ATM VCs

Wireless Features
  • Support IEEE 802.11g/b and 802.11n draft 2.0 Wireless Access Point
  • Support 2 Tx, 3 Rx for wireless signal receive and transmit
  • Support 128-Bit and 64-Bit WEP encryption, WPA-PSK
  • Data rate : Up to 300Mbps
  • Transmit Power : 16 dBm
  • Receive Sensitivity : 11Mbps¡G-80dBm /54Mbps¡G-65dBm

Router Features
  • DHCP Server and Client
  • NAPT (Network Address and Port Translation)
  • NAT (Network Address Translation)
  • ICMP (Internet Control Message Protocol)
  • DDNS (Dynamic Domain Name Service)

Device Management
  • Firmware upgrade via Web console
  • WAN and LAN side connection statistics
  • Configuration of static routes and routing table
  • Configuration of NAT / NAPT
  • Password protected access
  • Selection of Bridge or Router Mode
  • PPP user ID and password
  • Configuration of VCs (Virtual Circuits)

Security
  • Built-in Firewall
  • Access Control
  • Packet filtering
  • Password protection for system management

Power
  • 9V AC, 1.5A

Environment
  • Temperature : 0¢J -55 ¢J
  • Humidity : 10% - 90%, non-condensing

Certifications

 CE, FCC

Diagram :

[Return]