Voip HSUPA- Wireless Router

 Wireless 11n Router (2T2R) 

Features

  • Operates on 2.4 GHz frequency band including True MIMO mode

  • Supports True MIMO wireless, Compatibility with IEEE 802.11g/b and 802.11n draft 2.0 (2.4GHz) standards

  • Superior wireless coverage, less dead spaces and higher throughput with MIMO technology

  • Supports data rates up to 300Mbps for wireless networks(2T2R)

  • Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x) and WPS (Wi-Fi Protected Setup) functions for high level of security

  • Compliant with IEEE 802.3, 802.3u 10/100M Ethernet standards

  • Configuration and management operated via WWW browser with password protected access

  • Supports DDNS, DMZ and Port-forwarding

  • WAN and LAN side connection statistics

  • DMZ and Virtual Server function provided operating modes include routing, bridge, static IP, PPPoE, PPPoA etc

  • All Ethernet ports support Auto-Crossover (MDI/MDI-X) - No need for crossover cables

  • Firmware upgrade via HTTP

Specification :

¡@

Interface
  • 4 RJ-45 for Ethernet, 10/100M
  • 1 RJ-45 for WAN, 10/100M
  • 2 Detachable Antennas
  • 1 Power Jack
Standards
  • IEEE 802.11b, 802.11g and 802.11n draft 2.0 wireless standards
  • IEEE 802.3, 802.3u 10/100M Ethernet standard
Wireless Features
  • Support IEEE 802.11g, 802.11b and 802.11n Wireless Access Point
  • Support 128-Bit and 64-Bit WEP, WPA-PSK, WPA2 wireless encryption
  • Data rate : Up to 300Mbps (2T2R)
  • Transmit Power : 17¡Ó2 dBm
  • IEEE 802.11b: 1, 2, 5.5 and 11 Mbps
  • IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  • IEEE 802.11n(draft 2.0): up to 300Mbps
Security
  • Built-in Firewall
  • Access Control
  • Packet filtering
  • Password protection for system management
Router Features
  • DHCP Server and Client
  • NAPT (Network Address and Port Translation)
  • NAT (Network Address Translation)
  • ICMP (Internet Control Message Protocol)
  • DDNS (Dynamic Domain Name Service)
Device Management
  • Firmware upgrade via Web console
  • WAN and LAN side connection statistics
  • Configuration of static routes and routing table
  • Configuration of NAT / NAPT
  • Password protected access
  • Selection of Router Mode
  • PPP user ID and password
  • DHCP Client or Static IP for WAN port
Power
  • 9V AC, 1A
Environment
  • Temperature : 0¢J -55 ¢J
  • Humidity : 10% - 90%, non-condensing
Certifications
  • CE, FCC

Diagram :

¡@

¡@

[Return]