10/100Mbps Ethernet Adapter

MODEL TYPE:

• FE100R3C (w/o Wake On Lan)

• FE100R3CW (w/ Wake On Lan)

The FE100R3C is a highly integrated and cost-effective single-chip Fast Ethernet card that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control.
It also supports Advanced Configuration Power management Interface (ACPI), PCI power management for modern operating systems that is capable of Operating System Directed Power Management (OSPM) to achieve the most efficient power management.
Besides the ACPI feature, the FE100R3C also supports remote wake-up (including AMD Magic Packet*, LinkChg, and Microsoft ® wake-up frame) in both ACPI and APM environments. Especially, the FE100R3C is capable of performing internal reset whenever there is (auxiliary) power applied to.
The FE100R3C keeps network maintenance cost low and eliminates usage barriers. It is the easiest way to upgrade a network from 10 to 100Mbps. It also supports full-duplex operation, making possible 200Mbps of bandwidth at no additional cost. 
It includes an interface for a boot ROM and can be used in diskless workstations, providing maximum network security and ease of management.

KEY FEATURES:

• Integrated Fast Ethernet MAC, Physical chip and transceiver in one chip

• 10 Mb/s and 100 Mb/s operation

• Supports 10 Mb/s and 100 Mb/s N-way Auto-negotiation operation

• PCI local bus single-chip Fast Ethernet controller

• Compliant to PCI Revision 2.2

• Supports PCI clock 16.75MHz-40MHz

• Supports PCI target fast back-to-back transaction

• Supports ACPI, PCI power management

• Supports up to 128K bytes Boot ROM interface for EPROM

• Compliant to PC99 standard

• Supports Wake-On-LAN function and remote wake-up (Magic Packet*, LinkChg and  Microsoft ® wake-up frame)(Optional)

• Supports 4 Wake-On-LAN (WOL) signals (active high, active low, positive pulse, and negative pulse)(Optional)

• Includes a programmable, PCI burst size and early tx/rx threshold.

• Contains two large (2Kbyte) independent receive and transmit FIFO’ s

• Advanced power saving mode when LAN function or wakeup function is not used

• Half/Full duplex capability

• Supports Full Duplex Flow Control (IEEE 802.3x)

• 3.3V power supply with 5V tolerant I/Os.

[Return]