SW2400      

Introduction

The SW2400 Nway Switching HUB is designed with 19-inch case for rack-mounting, which provide simultaneous transmission of multiple packets via an internal high-speed data channel.  They are designed with plug and play installation for easy implement and effective, affordable solution for higher network and flexible for variety of application.

Features:

     SW2400 is 24-port 10/100Mbps TX Auto-Negotiation Ethernet Switch HUB, complies with the IEEE802.3 Ethernet and IEEE802.3u Fast Ethernet standard.

     Features Store-and-Forward mode with wire-speed filtering and forwarding rates.

     An optional 100FX module connector for fiber connection.

     Full/Half-Duplex capability on every TX ports, total bandwidth up to 200Mbps per port

     IEEE802.3x compliant full-duplex flow control.

     Support up to 3K MAC address

     Support up to 1024K full packet size buffers with dynamic allocation Broadcast storm control

     Half-Duplex flow control.

     Runt and CRC Filtering eliminates erroneous packets to optimize the network bandwidth

     Support to handle up to 1536 bytes packet

     Internal power supply

     LED indicators for simple diagnostics and management

     Provide a push button switch  for MDI and MDI-X mode changing

     Provide a reset switch in front panel

     Plug and Play

Specifications:

     Standard : IEEE802.3 / IEEE802.3u

     Network Media:
100Base-TX-UTP/STP category 5 cable
10Base-T-UTP/STP category 3 or 5 cable

    Connector : 16 port STP RJ-45 port for 10/100Mbps

     LED indicators:
System – Power OK LED
Individual port – Link/active, Speed, Full/Half-Duplex and collision Collision

     Dimension: 440mm(L) x 220mm(W) x 44mm(H)

     Temperature:
Operating - 0°C - 50°C,
Storage - 20°C - 70°C

     Humidity:
Operating - 10% - 90% RH,
Storage - 5% - 90% RH

     Input Power Requirement : 100-240VAC, 50-60Hz, Auto-sensing

     Registrations: FCC, CE

  [Return]