32-Port rack mount 10/100Mb
Auto-negotiation Switching HUB
SW3200V
¡@
32 port rack mount 10/100Mbpx Auto-negotiation Switching Hub
The SW3200/SW3200V NWay Switching hub is designed with 19-inch case for rack-mounting, which provide simultaneous transmission of multiple packets via an internal high-speed data channel. They are designed with plug and play installation for easy implement and effective, affordable solution for higher network and flexible for variety of applications.
KEY FEATURES:
NSW3200 is 32 port 10/l00Mbps TX Auto-negotiation Ethernet Switch hub, complies with the IEEE802.3 Ethernet and IEEE802.3u Fast Ethernet standard
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
Full/Half-Duplex capability on every TX ports, total bandwidth is up to 200Mbps per port
Support up to total 4K, MAC address
Runt and CRC Filtering eliminates erroneous packets to optimize the network bandwidth
Support to handle up to 1536 bytes packet
Internal power supply
LED indicators for simple diagnostics and management
Provide a push button switch for MDI and MDI-X mode changing
Plug and play
SPECIFICATION:
|
Standard: |
IEEE802.3/
IEEE802.3u |
|
Interface
media: |
STP
RJ-45 connector |
|
Transmission
mode: |
Auto-negotiation
(half/full-duplex, 10/100Mbps) |
|
Network
Media: |
100Base-TX:
UTP/STP category 5 cable; 10Base-T: UTP/STP category 3 or 5 cable |
|
Connector: |
32
port STP RJ-45 port for 10/100Mbps |
|
LED
indicators: |
System-Power
OK LED; Individual port-link/activity, speed, full/half duplex, and
collision LEDs |
|
Dimension: |
441mm(L)
x 192mm(W) x 55mm(H) |
|
Temperature: |
Operating:
5ºC to
50ºC/Storage:
-20ºC
to 65ºC |
|
Humidity: |
Operating:
10% to 90% RH (non-condensing) |
|
Input
Power Requirement: |
90~26OVAC,
50~60Hz |
|
Registrations: |
FCC,
CE, VCCI, CSA+NRTL |
|
Buffer
memory: |
4M
bytes |
|
MAC
address: |
4K
entries |
|
Power
Consumption: |
56W |
|
VLAN
& Trunk supports: |
DB-25
connector for configuration is built on V models |