IEEE 1394 + USB Host Card

MP814

VT6306 (Single Chip) IEEE 1394A THREE PORT 

FEATURES

• Supports Provisions of IEEE 1394-1995 Standard for High Performance Serial Bus and the P1394a Supplement 2.0.
• Full P1394a Supplement Support includes: 
  • Arbitrated short reset,
  • Connection Debounce,
  • Multi-speed Concatenation,
  • Ack Accelerated Arbitration,
  • Fly-By Concatenation,
  • Programmable Port Disable, Suspend, Resume,
  • PHY IDs Do Not Increment Past 63 
• Provides Four 1394a Fully Compliant Cable Ports at 100/200/400 Megabits per Second (Mbps)
• Single 3.3 V power supply
• Logic Performs Bus Initialization and Arbitration Functions
• Encode and Decode Functions Included for Data-Strobe Bit-Level Encoding
• Incoming Data Resynchronized to Local Clock.
• Data Interface to Link-Layer Controller Provided Through 2/4/8 Parallel Lines at 49.152 MHz
• 24.576 MHZ Crystal Oscillator and PLL Provide TX/RX Data at 100/200/400 Mbps and Link-Layer Controller Clock at 49.152 MHZ.
• Cable Power Presence Monitoring.
• Programmable Node Power Class Information for System Power Management
• Embedded Bus Holder Isolation to Link Layer Controller Interface
• Optional On-chip Resistors to Reduce Component Counts for Electrical Isolation to Link Layer Controller Interface
• Fully Compliant P1394a 2.0 PHY Map
• Separate TPBIAS for Each Port
• Fully Interoperable with IEEE Std1394-1995 Devices
• Cable Ports Monitor Line Conditions for Active Connection to Remote Node
• Low Power Design for Battery-Powered Applications includes: User Controlled Power-Down via PD, Automatic Device Power-Down during All Ports Suspended and Link Interface Disabled, Link Interface Power-Down via Inactive LPS, Automatic Inactive Ports Powered-Down, and Automatic Inactive Logic Power-Down
• Self Power Up Reset and Pinless PLL to Reduce Component Counts on System

USB Chip OPTi 82C861

FEATURES

• Adds 2 USB ports to PC
• Supplies 500mA of power to each USB port
• Delivers a data transfer rate of up to 12Mbps
• Provides 2 additional USB ports to an existing USB system
• Connects to USB printer, modems, speakers, scanners and all other USB device
• Easy plug and play installation
• Plug and Play for Windows 95 OSR2.1/98/98SE/ME/2000 , IRQ Sharing, No Jumper setting
• Set the I/O addresses automatically
• Supports Windows 95 OSR2.1/98/98SE/ME/2000

[Return]      [Return to IEEE1394]